LANTHANUM 2-ETHYLHEXANOATE
LANTHANUM (III) 2-ETHYLHEXANOATE
CAS: 67816-09-5
Molecular Formula: C8H16LaO2
LANTHANUM 2-ETHYLHEXANOATE - Names and Identifiers
LANTHANUM 2-ETHYLHEXANOATE - Physico-chemical Properties
| Molecular Formula | C8H16LaO2 |
| Molar Mass | 283.12 |
| Flash Point | <10℃ (tag closed test) |
| Water Solubility | Soluble In Organic Solvents. Not miscible in water. |
| Physical and Chemical Properties | EPA Chemical Information Hexanoic acid, 2-ethyl-, lanthanum(3 ) salt (67816-09-5) |
LANTHANUM 2-ETHYLHEXANOATE - Risk and Safety
| UN IDs | UN1208 |
| TSCA | Yes |
| Hazard Class | 3 |
| Packing Group | II |
LANTHANUM 2-ETHYLHEXANOATE - Introduction
LANTHANUM (III) 2-ETHYLHEXANOATE(LANTHANUM (III) 2-ETHYLHEXANOATE) is an organic neodymium compound with the chemical formula La(C8H15O2)3.
Nature:
-Appearance: LANTHANUM (III) 2-ETHYLHEXANOATE is usually a white crystalline or powdery substance.
-Melting point: Its melting point is between about 100-200°C.
-Solubility: It has good solubility in organic solvents (such as ethanol, benzene and chloroform).
Use:
LANTHANUM (III) 2-ETHYLHEXANOATE has many applications in the chemical field:
-Catalyst: It can be used as a catalyst for preparing lanthanum oxide nanoparticles by sol-gel method;
-Metal organic chemistry: commonly used in the preparation of other rare earth element complexes or complexes, with special magnetic, fluorescent and luminescent properties;
-Coating: It can be used to protect the metal surface or improve the effect of surface treatment.
Method:
A method for preparing LANTHANUM (III) 2-ETHYLHEXANOATE is to dissolve N-octanol in a solution of cerous chloride (CeCl3), and gradually add isooctanoic acid under heating and stirring. Thereafter, the LANTHANUM (III) 2-ETHYLHEXANOATE is crystallized by evaporation of the solvent. Finally, the target product is obtained by filtration and drying.
Safety Information:
- LANTHANUM (III) The specific toxicity and safety risks of 2-ETHYLHEXANOATE have not been fully studied, so safety precautions need to be paid attention to during use.
-Avoid contact with skin, eyes and respiratory tract during operation, and avoid inhalation or swallowing.
-When used, it should be carried out in a well-ventilated area and equipped with suitable personal protective equipment, such as laboratory coats, gloves and eye protection.
-If contact or inhalation occurs, rinse immediately with plenty of water and seek medical attention as soon as necessary.
-Observe relevant safety codes and regulations during storage and disposal.
Please note that the above information is for reference only, and specific safety operation guidelines should be formulated according to the specific conditions and use requirements of the laboratory.
Nature:
-Appearance: LANTHANUM (III) 2-ETHYLHEXANOATE is usually a white crystalline or powdery substance.
-Melting point: Its melting point is between about 100-200°C.
-Solubility: It has good solubility in organic solvents (such as ethanol, benzene and chloroform).
Use:
LANTHANUM (III) 2-ETHYLHEXANOATE has many applications in the chemical field:
-Catalyst: It can be used as a catalyst for preparing lanthanum oxide nanoparticles by sol-gel method;
-Metal organic chemistry: commonly used in the preparation of other rare earth element complexes or complexes, with special magnetic, fluorescent and luminescent properties;
-Coating: It can be used to protect the metal surface or improve the effect of surface treatment.
Method:
A method for preparing LANTHANUM (III) 2-ETHYLHEXANOATE is to dissolve N-octanol in a solution of cerous chloride (CeCl3), and gradually add isooctanoic acid under heating and stirring. Thereafter, the LANTHANUM (III) 2-ETHYLHEXANOATE is crystallized by evaporation of the solvent. Finally, the target product is obtained by filtration and drying.
Safety Information:
- LANTHANUM (III) The specific toxicity and safety risks of 2-ETHYLHEXANOATE have not been fully studied, so safety precautions need to be paid attention to during use.
-Avoid contact with skin, eyes and respiratory tract during operation, and avoid inhalation or swallowing.
-When used, it should be carried out in a well-ventilated area and equipped with suitable personal protective equipment, such as laboratory coats, gloves and eye protection.
-If contact or inhalation occurs, rinse immediately with plenty of water and seek medical attention as soon as necessary.
-Observe relevant safety codes and regulations during storage and disposal.
Please note that the above information is for reference only, and specific safety operation guidelines should be formulated according to the specific conditions and use requirements of the laboratory.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: LANTHANUM (III) 2-ETHYLHEXANOATE Request for quotationCAS: 67816-09-5
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Product Name: LANTHANUM (III) 2-ETHYLHEXANOATE Request for quotation
CAS: 67816-09-5
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589
Wechat: +86 19849939632
CAS: 67816-09-5
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589
Wechat: +86 19849939632
Spot supply
Product Name: LANTHANUM (III) 2-ETHYLHEXANOATE Request for quotationCAS: 67816-09-5
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Product Name: LANTHANUM (III) 2-ETHYLHEXANOATE Request for quotation
CAS: 67816-09-5
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589
Wechat: +86 19849939632
CAS: 67816-09-5
Tel: +86 19849939632
Email: 2470479589@qq.com
Mobile: +86 19849939632
QQ: 2470479589
Wechat: +86 19849939632
View History